JUS M K3 055-1977 Builders-hardware Doorknobs Shapeand dimensions《建筑者的硬件 门把手，形状和尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F1840-2010e1 Standard Terminology for Surgical Suture Needles《外科手术缝合针的标准术语》.pdf

ASTM F1841-1997(2005) Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps《连续流动血泵里溶血评定的标准操作规程》.pdf

ASTM F1841-1997(2013) Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps《连续流动血泵里溶血评定的标准操作规程》.pdf

ASTM F1841-1997(2017) Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps《评定连续流动血液泵溶血反应的标准实施规程》.pdf

ASTM F1842-2002 Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications《测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法》.pdf

ASTM F1842-2009 Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications《测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法》.pdf

ASTM F1842-2015 Standard Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device《测定薄膜开关或印刷电子设备用柔性基体上油墨或涂层粘附性的标.pdf

ASTM F1843-1997(2002) Standard Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements on Membrane Switch Overlays《薄膜开关涂覆层上抛光光泽测量用透明塑料薄膜的样品制备的标.pdf

ASTM F1843-2009 Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements《抛光光泽测量用透明塑料薄膜的样品制备的标准指南》.pdf