JUS M R4 030-1982 Flue gas tubes for heating Shapes and dimensions《制热用烟气管道 形状尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2628-2009 Standard Practice for Dosimetry for Radiation Processing.pdf

ASTM E2629-2011 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems《过程解析技术(PAT)控制系统验证标准指南》.pdf

ASTM E2630-2008 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source.pdf

ASTM E2630-2008(2013) Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source《采用窄带源测定荧光标本的亮度比的标准试验方法》.pdf

ASTM E2630-2008e1 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source《使用窄带源测定荧光标本的亮度比的标准试验方法》.pdf

ASTM E2631-2009 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label《实体控制补充识别标签的实际位置的标准规程》.pdf

ASTM E2631-2009(2015) Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label《实体控制补充识别标签的实际位置的标准实践规程》.pdf

ASTM E2632 E2632M-2013 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials《评估甲板材料在甲板消防条件下试验响应的标准试验方法》.pdf

ASTM E2632 E2632M-2013e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials《评估甲板材料在甲板消防条件下试验响应的标准试验方法》.pdf