JUS N A5 720-1980 Basic environmental testing procedures Test Da Accekrated damp heat《基本环境测试程序 测试Da：加速湿热》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 22874-1986 Complete filled transport packages - Method of test for stacking using compression tester《整包运输包装件 压缩试验机用堆放试验方法》.pdf

BS EN 22876-1986 Complete filled transport packages Method for determination of resistance to damage by rolling《整包运输包装件 耐滚动破坏的性能测定方法》.pdf

BS EN 23270-1991 Specification for temperatures and humidities for conditioning and testing paints varnishes and their raw materials《油漆、清漆及其原料的调节和试验温度和湿度规范》.pdf

BS EN 23312-1993 Sintered metal materials and hardmetals - Determination of Young modulus《绕结金属材料和硬质合金 杨氏模量的测定》.pdf

BS EN 23878-1993 Hardmetals - Vickers hardness test《硬质合金 维氏硬度试验》.pdf

BS EN 23909-1994 Hardmetals - Determination of cobalt - Potentiometric method《硬质合金 钴含量测定 电位滴定法》.pdf

BS EN 23923-2-1993 Metallic powders - Determination of apparent density - Scott volumeter method《金属粉末 表观密度的测定 第2部分 斯科特(Scott)容积计法》.pdf

BS EN 23995-1993 Specification for metallic powders - Determination of green strength by transverse rupture of rectangular compacts《金属粉末规范 矩形压坯横向断裂压坯强度的测定》.pdf

BS EN 24003-1993 Permeable sintered metal materials - Determination of bubble test pore size《不密封烧结金属材料 气泡试验孔隙尺寸的测定》.pdf