JUS N A8 110-1978 Paper for electrotechnical purposes Measurement of the averagt viscosimetric degree of polvmerization of new and aged electrical papers《电气技术用纸张 新旧电工纸张的平均聚合粘度测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5326-1994a(2013) Standard Test Method for Color Development in Tinted Latex Paints《染色胶乳涂料中颜色显现的标准试验方法》.pdf

ASTM D5327-1997(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions《在一般实验室条件下评定和比较传输效率评价的标准操作规程》.pdf

ASTM D5327-1997(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions《在一般实验室条件下评定和比较传输效率评价的标准操作规程》.pdf

ASTM D5329-2004 Standard Test Methods for Sealants and Fillers Hot-Applied for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements《沥青及硅酸盐水泥混凝土路面上接缝与裂纹用热铺密封料和填充料的标.pdf

ASTM D5329-2007 Standard Test Methods for Sealants and Fillers Hot-Applied for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements《沥青及硅酸盐水泥混凝土路面接缝与裂纹用热铺密封料和填充料的标准.pdf

ASTM D5329-2009 Standard Test Methods for Sealants and Fillers Hot-Applied for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements《沥青及硅酸盐水泥混凝土路面上接缝与裂纹用热铺密封料和填充料的标.pdf

ASTM D5329-2015 Standard Test Methods for Sealants and Fillers Hot-Applied for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements《沥青路面和硅酸盐水泥混凝土路面接缝和裂纹用热施.pdf

ASTM D5329-2016 Standard Test Methods for Sealants and Fillers Hot-Applied for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements《沥青路面和硅酸盐水泥混凝土路面接缝和裂纹用热施.pdf

ASTM D5330 D5330M-2006 Standard Specification for Pressure-Sensitive Tape for Packaging Filament-Reinforced《包装用纤维增强压敏包装带的标准规范》.pdf