JUS N A8 293-1984 Pressure-sensitive adhesive tapes for electrical purposes Adhesive tapes made ofpolyester film with ther- mosetting adhesive《电气用压感胶纸带 聚脂薄膜胶带，带热固胶粘剂》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D867-A-2008 ABS + POLYCARBONATE (ABS+PC) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯混合物(ABS+PC).pdf

FORD WSB-M4D868-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 37% GLASS FIBER REINFORCED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷的37%玻璃纤维增强的聚对苯二甲酸乙二酯(PET)成型料.pdf

FORD WSB-M4D871-A1-2006 POLYVINYL CHLORIDE (PVC) FLEXIBLE 55 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部用硬度55A的柔性聚氯乙烯(PVC)(和FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSB-M4D871-A2-2006 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D871-A1)《汽车内部用硬度为65 A的柔性聚氯乙烯(PVC) .pdf

FORD WSB-M4D871-A3-2006 POLYVINYL CHLORIDE (PVC) FLEXIBLE 75 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D871-A1)《汽车内部用硬度为75 A的柔性聚氯乙烯(PVC) .pdf

FORD WSB-M4D871-A4-2006 POLYVINYL CHLORIDE (PVC) FLEXIBLE 85 A DUROMETER HARDNESS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D871-A1)《汽车内部用硬度为85 A的柔性聚氯乙烯(PVC) .pdf

FORD WSB-M4D874-A-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 80 DUROMETER A HARDNESS REMANUFACTURED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为80 A的柔性聚氯乙烯(PVC)废料再生成型料 .pdf

FORD WSB-M4D874-A2-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 92 DUROMETER A HARDNESS REMANUFACTURED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D874-A).pdf

FORD WSB-M4D875-A-2006 POLYPROPYLENE COPOLYMER (PP) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《聚丙烯(PP)共聚物冲击改性成型料 与标准FORD WSS-M99P111.pdf