JUS N E3 829-1983 Test starter for the control of the performance and endurance at starterholders《启动器的性能控制和启动器座耐用度测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 10231.24-2006 刀具产品检测方法 第24部分 机用锯条.pdf

JB T 10231.3-2015 刀具产品检测方法 第3部分 立铣刀.pdf

JB T 10231.4-2015 刀具产品检测方法-第4部分 丝锥.pdf

JB T 10231.5-2002 刀具产品检测方法.第5部分 齿轮滚刀.pdf

JB T 10231.6-2002 刀具产品检测方法.第6部分 插齿刀.pdf

JB T 10231.7-2002 刀具产品检测方法.第7部分 圆拉刀.pdf

JB T 10231.8-2002 刀具产品检测方法.第8部分 板牙.pdf

JB T 10231.9-2002 刀具产品检测方法.第9部分 绞刀.pdf

JB T 10232.1-2001 成套螺纹工具.第1部分：型式和尺寸.pdf