JUS N E5 240-1991 Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices《低压熔断器 保护半导体设备的熔断器的补充要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65519-1984 Aerospace pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread short thread steel nominal tensile strength 900 MPa for temperatures up to 235 C《航空和航天 带MJ螺纹.pdf

DIN 65520-1984 Aerospace pan head bolts close tolerance with ribbed TORQ-SET (ACR) recess an MJ-thread short thread steel nominal tensile strength 900 MPa for temperatures up to 23.pdf

DIN 65521-1-1984 Aerospace TORQ-SET and ACR dimensions《航空航天 翼形十字槽 第1部分 尺寸》.pdf

DIN 65521-2-1984 Aerospace TORQ-SET and ACR penetration gauges《航空航天 翼形十字槽 第2部分 深度规》.pdf

DIN 65521-3-1984 Aerospace TORQ-SET and ACR screwdriver points《航空航天 翼形十字槽 第3部分 改锥尖》.pdf

DIN 65522-1984 Aerospace screws hexagon with MJ-thread threaded opproximatley to head corrosion-resisting steel nominal tensile strength 700 MPa for temperatures up to 425 C《航空和航天 .pdf

DIN 65523-1984 Aerospace hexagon bolts with MJ-thread short thread corrosion-resisting steel nominal tensile strength 700 MPa for temperatures up to 425 C《航空和航天 带MJ螺纹的、短螺纹、耐蚀钢制、标称抗.pdf

DIN 65524-1984 Aerospace heaxagon bolts with MJ-thread short thread steel nominal tensile strength 900 MPa for temperatures up to 235 C《航空和航天 带MJ螺纹的、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下的六角.pdf

DIN 65525-1992 Aerospace bolts hexagon close tolerance with MJ-thread short thread steel nominal tensile strength 1100 MPa for temperatures up to 235 C《航空航天 使用温度235℃以下公称抗拉强度1100MPa.pdf