JUS N E5 505-1991 Eigh voltage fuses Current-limiting fuses General tecbnical requirements tests and application guide《高压熔断器 限流熔断器 一般技术要求，测试和应用指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F1960-2012 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing《与交联聚乙烯 (PEX) 管一起使用的带PEX增强环的冷膨胀管件的标.pdf

ASTM F1960-2014 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene &40 PEX&41 Tubing《与交联聚乙烯 (PEX) 管一起使用的带PEX增强环的冷膨.pdf

ASTM F1960-2014a Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing《交联聚乙烯 (PEX) 管件用带PEX加固环的冷膨胀配件的标准规格.pdf

ASTM F1960-2015 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing《交联聚乙烯 (PEX) 管件用带PEX加固环的冷膨胀配件的标准规格》.pdf

ASTM F1961-2002a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing《交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的.pdf

ASTM F1962-2005 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《包括渡口在内的障碍物下聚乙.pdf

ASTM F1962-2005e1 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《包括渡口在内的障碍物下.pdf

ASTM F1962-2011 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《安装聚乙烯管或在障碍物 包.pdf

ASTM F1963-2005 Standard Specification for Deep-Fat Fryers Gas or Electric Open《燃气或电敞口式深油煎锅标准规范》.pdf