JUS N K5 010-1979 Low-voltage controlgear Contacton General reguirements and testing《低压控制设备 通用要求及测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60534-2-4-2009 en Industrial-process control valves - Part 2-4 Flow capacity - Inherent flow characteristics and rangeability《工业过程控制阀 第2-4部分 流通能力 固有流动特性和变化范围》.pdf

EN 60534-2-5-2003 en Industrial-process control valves Part 2-5 Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery《工业过程控制阀 第2-.pdf

EN 60534-3-1-2000 en Industrial-Process Control Valves Part 3-1 Dimensions - Face-To-Face Dimensions for Flanged Two-Way Globe-Type Straight Pattern and Centre-To-Face Dimensions f.pdf

EN 60534-3-2-2001 en Industrial-Process Control Valves Part 3-2 Dimensions - Face-to-Face Dimensions for Rotary Control Valves Except Butterfly Valves《工业过程控制阀 第3-2部分 尺寸 蝶阀除外的旋转控制阀门.pdf

EN 60534-3-3-1998 en Industrial-Process Control Valves Part 3-3 Dimensions - End-to-End Dimensions for Buttweld Two-Way Globe-Type Straight Pattern Control Valves《工业过程控制阀 第3-3部分 尺寸.pdf

EN 60534-4-2006 en Industrial-process control valves Part 4 Inspection and routine testing《工业过程控制阀 第4部分 检验和例行试验 IEC 60534-4 2006》.pdf

EN 60534-5-2004 en Industrial-process control valves Part 5 Marking《工业过程控制阀 第5部分 标志 IEC 60534 5 2004》.pdf

EN 60534-6-1-1997 en Industrial-Process Control Valves Part 6 Mounting Details for Attachment of Positioners to Control Valves Section 1 Positioner Mounting on Linear Actuators《工业过.pdf

EN 60534-6-2-2001 en Industrial-Process Control Valves Part 6-2 Mounting Details for Attachment of Positioners to Control Valves - Positioner Mounting on Rotary Actuators《工业过程控制阀 第.pdf