JUS N P0 101-1983 Electrical equipment of road vehicles《公路车辆用电子设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M3D178-A2-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 13% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M.pdf

FORD WSS-M3D178-A3-2014 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 14% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS HIGH FILL CONTENT TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M3D180-A1-2005 EPOXY VINYL ESTER EVE MATRIX 32% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《以乙烯基乙醚为基底的32%玻璃纤维增强的环氧基乙烯基酯片状成型料 与标准F.pdf

FORD WSS-M3D180-A2-2005 EPOXY VINYL ESTER EVE MATRIX 32% GLASS FIBER REINFORCED HIGH MODULUS SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《以乙烯基乙醚为基底的32%玻璃纤维增强的环氧基乙烯.pdf

FORD WSS-M3D181-A-2005 PHENOLIC (PF) 65% GLASS AND MINERAL FILLED COMPRESSION AND OR TRANSFER SCREW INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《65%玻璃和矿物填充的酚醛树.pdf

FORD WSS-M3D182-A-2005 PHENOLIC (PF) 55% GLASS AND MINERAL FILLED COMPRESSION AND OR TRANSFER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《55%玻璃和矿物填充的酚醛树脂(PF)压制和 或传递模塑成型.pdf

FORD WSS-M3D184-A-2004 UNSATURATED POLYESTER (UP) IMPACT MODIFIED 28% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《28%玻璃纤维增强的冲击改性不饱和聚酯(UP)片状.pdf

FORD WSS-M3D185-A-2003 UNSATURATED POLYESTER (UP) MODIFIED 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的不饱和聚酯(UP)改性片状成型料 与标准F.pdf

FORD WSS-M3D186-A-2005 UNSATURATED POLYESTER (UP) 30% GLASS FIBER REINFORCED CONDUCTIVE SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的不饱和聚酯(UP)导电片状成型料 与标.pdf