JUS N R4 422-1978 Electromechanical components for electronk equipment Test methods Test 7b Mechanical strength impact test《电子设备用机电元件 测试方法 测试7b：机械碰撞强度试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST ISO 11843-4-2005 Statistical methods Capability of detection Methodology for comparing the minimum detectable value with a given value《统计方法 检测能力 最小可检测值与给定值比较法》.pdf

GOST ISO 11850-2011 Self-propelled machinery for forestry Safety requirements《林业自推进式机械 安全性要求》.pdf

GOST ISO 11922-1-2006 Thermoplastics pipes for the conveyance of fluids Dimensions and tolerances Part 1 Metric series《液体输送用热塑性塑料管 尺寸和公差 第1部分 公制系列》.pdf

GOST ISO 11930-2014 Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product《美容 微生物学 化妆品抗菌保护的评估》.pdf

GOST ISO 12081-2013 Milk Determination of calcium content Titrimetric method《牛奶 钙含量的测定 滴定法》.pdf

GOST ISO 12117-2-2013 Earth-moving machinery Laboratory tests and performance requirements for protective structures of excavators Part 2 Roll-over protective structures (ROPS) for.pdf

GOST ISO 12301-1995 Plain hearings Quality control techniques and inspection of geometrical and material quality characteristics《滑动轴承 几何指标及材料质量指标的检验方法》.pdf

GOST ISO 12306-1996 Plain bearings Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes《普通轴承 薄壁半轴承和薄壁衬套壁厚测量》.pdf

GOST ISO 12307-1-1996 Plain bearings Wrapped bushes Checking the outside diameter《普通轴承 卷制衬套 外径检查》.pdf