JUS N S9 025-1978 Laser Labelling of laser product indoor and autdoor environment《激光 激光产品的标识 室内外环境》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M2D379-A1-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 68 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D379-A1-2017 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 68 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D379-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS INTERIOR (Shown on WSD-M2D378-A2)《汽车内部用硬度69 A的.pdf

FORD WSD-M2D379-A4-2010 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 68 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为68 A的三元乙丙橡胶(EPDM)橡胶改性热塑性聚烯径(.pdf

FORD WSD-M2D379-A6-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M2D378-A6)《硬度为76 A.pdf

FORD WSD-M2D379-A6-2016 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M2D378-A6).pdf

FORD WSD-M2D380-A1-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 76 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D380-A1-2017 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 76 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D380-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 75 DUROMETER A HARDNESS INTERIOR (Shown on WSD-M2D378-A2)《汽车内部用硬度为75 A.pdf