JUS U A9 066-1983 Joints in building Vocabuhry《建筑物接缝 词汇》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D874-A2-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 92 DUROMETER A HARDNESS REMANUFACTURED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D874-A).pdf

FORD WSB-M4D875-A-2006 POLYPROPYLENE COPOLYMER (PP) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《聚丙烯(PP)共聚物冲击改性成型料 与标准FORD WSS-M99P111.pdf

FORD WSB-M4D875-A2-2006 POLYPROPYLENE COPOLYMER (PP) IMPACT MODIFIED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《再生材料比例不低.pdf

FORD WSB-M4D880-A-2011 POLYETHYLENE (PE) LINEAR LOW DENSITY MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部线性低密度的模塑材料聚乙烯(PE) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D882-A1-2011 ACETAL (POM) COPOLYMER 10 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维加强模塑材料乙酸醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用.pdf

FORD WSB-M4D883-A1-2001 ACETAL (POM) COPOLYMER 20% GLASS FIBER REINFORCED MOLDING COMPOUND《20%玻璃纤维增强的乙缩醛共聚物（POM）成型料》.pdf

FORD WSB-M4D884-A1-2010 POLYPROPYLENE (PP) COPOLYMER 5% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《5%玻璃纤维增强的聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSB-M4D884-A2-2010 POLYPROPYLENE (PP) COPOLYMER 5% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D884-A1)《汽车内部用5%.pdf

FORD WSB-M4D889-A1-2011 POLYVINYL CHLORIDE (PVC) RIGID 65 D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《坚硬的 硬度为65D的聚氯乙烯PVC) 与福特WSS-M99P1111-A 一起使用》.pdf