JUS U F3 030-1990 Finishing trorks in bnilding Stiff slabs of floating floor ccmstructlons of caustic magnesite Tehnical requirements《建筑物装饰工程 轻烧菱镁砂浮动地板的硬板施工 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M1A367-A44-2017 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11).pdf

FORD WSS-M1A367-A45-2012 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11)《冷轧高强度微合金化高强.pdf

FORD WSS-M1A367-A45-2017 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11).pdf

FORD WSS-M1A367-A46-2012 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11)《冷轧高强度微合金化高强.pdf

FORD WSS-M1A367-A46-2017 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11).pdf

FORD WSS-M1A367-A47-2012 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11)《冷轧高强度微合金化高强.pdf

FORD WSS-M1A367-A47-2017 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11).pdf

FORD WSS-M1A367-A48-2012 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11)《冷轧高强度微合金化高强.pdf

FORD WSS-M1A367-A48-2017 STEEL SHEET HOT ROLLED HIGH STRENGTH MICRO-ALLOYED HIGH-STRENGTH LOW-ALLOY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1A367-A11).pdf