JUS U F4 020-1990 Finishing norks in baildlng Bailding-in of buil ing joinery Tecbnical require- ments《建筑物的装饰工程 建筑物接缝 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R IEC 61223-3-3-2001 Evaluation and routine testing in medical imaging departments Part 3-3 Imaging performance of X-ray equipment for digital subtraction angiography (DSA) Ac.pdf

GOST R IEC 61223-3-4-2001 Evaluation and routine testing in medical imaging departments Part 3-4 Imaging performance of dental X-ray equipment Acceptance tests《医疗成像部门评估和常规测试 第3-4部分.pdf

GOST R IEC 61228-2014 Fluorescent ultraviolet lamps used for tanning Measurement and specification method《晒黑用紫外线荧光灯 测量和规范方法》.pdf

GOST R IEC 61241-2-3-1999 Electrical apparatus for use in the presence of combustible dust Part 2 Test methods Section 3 Method for determining minimum ignition energy of dust air .pdf

GOST R IEC 61249-2-2-2012 Materials for printed boards and other interconnecting structures Part 2-2 Reinforced base materials clad and unclad Phenolic cellulose paper reinforced lal g.pdf

GOST R IEC 61249-2-4-2012 Materials for printed boards and other interconnecting structures Part 2-4 Reinforced base materials clad and unclad Polyester non-woven woven fibreglass ical.pdf

GOST R IEC 61249-2-5-2012 Materials for printed boards and other interconnecting structures Part 2-5 Reinforced base materials clad and unclad Brominated epoxide cellulose paper rees l.pdf

GOST R IEC 61249-2-6-2012 Materials for printed boards and other interconnecting structures Part 2-6 Reinforced base materials clad and unclad Brominated epoxide non-woven and wovened .pdf

GOST R IEC 61249-2-7-2012 Materials for printed boards and other interconnecting structures Part 2-7 Reinforced base materials clad and unclad Epoxide woven E-glass laminated sheetst) .pdf