JUS U S4 022-1990 Strcst gully《内外排空车》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 3249-2017 Threaded suction strainers with non-return valve《带止回阀的螺纹连接的吸滤器》.pdf

DIN 32503-1979 Protective caps for pressure gauges with case diameter 63 mm used in welding cutting and allied processes《用于焊接、切割和相关工艺的外壳直径为63mm的压力测量仪( 压力表)的保护罩 》.pdf

DIN 32506-1-1981 Testing of Solderability for Soft Soldering Wetting tests《软钎焊可软钎性的检验 湿润试验》.pdf

DIN 32506-2-1981 Testing of solderability for soft soldering Vertical dipping test for specimens of copper alloys Testing Assessment《软钎焊可软钎性的检验 铜合金试样的垂直浸渍试验 检验、评定》.pdf

DIN 32506-3-1981 Testing of solderability for soft soldering Vertical dipping test for pre-tinned specimens Testing Assessment《软钎焊可软钎性的检验 预镀锡试样的垂直浸渍试验 检验、评定》.pdf

DIN 32508-2000 Micro devices for brazing and welding with own hydrogen and oxygen production - Mechanical and gas engineering requirements test marking《带自制氢和制氧装置的微型钎焊机和焊机 机械和气体技术要求.pdf

DIN 32509-2009 Hand-operated shut-off valves for welding cutting and allied processes - Type of construction safety requirements tests《焊接、切削和相关工艺用手动关闭阀 结构类型、安全要求、试验》.pdf

DIN 32510-2008 Thermal cutting - Boring with oxygen lance in mineral materials - Bases of process temperatures minimum accessories《热切割 使用氧气喷枪在矿物材料中钻孔 工艺基础、温度和最小配件》.pdf

DIN 32511-2007 Welding - Electron beam process for material treatment - Terms for processes and equipment《焊接 材料处理用电子束加工方法 加工设备术语》.pdf