JUS Z S2 302-1983 Road sings Sings regulating priority at intersections danger vvaming sings at approaches to intersections and design ofsigns《十字路口的优先通行信号和危险警告信号以及信号标记的设计》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M99P12-B2-2001 PERFORMANCE MARKING INK RESISTANT TO OIL PETROL AND HEAT (Shown on WSS-M99P12-B1)《耐油、汽油和耐高温的标记墨水的性能 列于标准WSS-M99P12-B1上［替代 FORD SQ-M99J9560-A FORD SQ-M99J956.pdf

FORD WSS-M99P12-B3-2001 PERFORMANCE MARKING INK RESISTANT TO OIL PETROL AND HEAT FOR INTERIOR ENGINE TRANSMISSION (Shown on WSS-M99P12-B1)《内部发动机 变速箱用耐油、汽油和耐高温的标记墨水的性能 列于标准WSS-M99P1.pdf

FORD WSS-M99P14-A5-2011 PAD PRINTING PLASTIC or PAINTED PLASTIC PROTECTED EXTERIOR or UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A 《垫料印刷 塑料或涂装塑料 受保护的外部或发动机舱 与福特WSS-M99P1111-A .pdf

FORD WSS-M99P2222-A1-2010 PERFORMANCE VEHICLE INTERIOR ENVIRONMENT QUALITY MATERIAL COMPONENT REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A 《车辆内部的环境质量材料 部件要求 与标准FORD WSS-M99P.pdf

FORD WSS-M99P2222-A2-2010 PERFORMANCE VEHICLE INTERIOR ENVIRONMENT QUALITY HVAC REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P2222-A1)《车辆内部的环境质量材料 通风、散热.pdf

FORD WSS-M99P2222-A3-2010 PERFORMANCE VEHICLE INTERIOR ENVIRONMENT QUALITY COMPLETE VEHICLE REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P2222-A1)《车辆内部的.pdf

FORD WSS-M99P2222-B1-2011 PERFORMANCE VEHICLE INTERIOR ENVIRONMENT QUALITY MATERIAL COMPONENT REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M99P2222-B2-2011 PERFORMANCE VEHICLE INTERIOR ENVIROMENT QUALITY ALLERGY TESTING AND DIRECT SKIN CONTACT REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD .pdf

FORD WSS-M99P2222-B3-2011 PERFORMANCE VEHICLE INTERIOR ENVIRONMENT QUALITY HVAC REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P2222-B1).pdf