JWWA G112-2015 Epoxy-powder coating for interior of ductile iron pipes and fittings for water supply.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 1-1994 BOLT-CRES DRILLED HEX HEAD 6 HOLES 375-24《螺栓 耐腐蚀刚钻孔六角头 6孔 375-24》.pdf

DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 2-2008 Bolt - Cres Drilled Hex Head 6 Holes 375-24《螺栓 耐腐蚀钢钻孔六角头 6孔 375-24》.pdf

DLA AN107601 THRU AN107700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD 6 HOLES 375-24《螺栓 耐蚀钢钻孔六角头 6孔 375-24》.pdf

DLA AN107701 THRU AN107800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD 6 HOLES 4375-20.pdf

DLA AN107801 THRU AN107900 REV 3-1986 BOLT - CRES DRILLED HEX HEAD 6 HOLES 500-20 (INACTIVE AFTER 27 DEC 1966).pdf

DLA AN107901 THRU AN108000 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD 6 HOLES 5625-18.pdf

DLA AN107901 THRU AN108000 REV 3-1986 BOLT-CRES DRILLED HEX HEAD 6 HOLES 5625-18.pdf

DLA AN108001 THRU AN108100 REV 3 VALID NOTICE 1-1994 BOLT-CRES DRILLED HEX HEAD 6 HOLES 625-18《螺栓 耐蚀钢钻孔六角头 6孔 625-18》.pdf

DLA AN108001 THRU AN108100 REV 3-1986 BOLT-CRES DRILLED HEX HEAD 6 HOLES 625-18《螺栓 耐蚀钢钻孔六角头 6孔 625-18》.pdf