KS 03-05-1976 KENYA STANDARD GLOSSARY OF TERMS USED IN PAPER INDUSTRY AND TRADE《肯尼亚造纸工业和贸易用标准术语表》.pdf

相关资源

HG T 3249.1-2008 造纸工业用重质碳酸钙.pdf

HJ 468-2009 清洁生产标准 造纸工业（废纸制浆）.pdf

HJ T 317-2006 清洁生产标准造纸工业（漂白碱法蔗渣浆生产工艺）.pdf

HJ T 340-2007 清洁生产标准 造纸工业（硫酸盐化学木浆生产工艺）.pdf

HJ T 408-2007 建设项目竣工环境保护验收技术规范造纸工业.pdf

HJ T 339-2007 清洁生产标准 造纸工业 （漂白化学烧碱法麦草浆生产工艺）.pdf

QB 3697-1999 造纸工业碱回收炉安全技术规范.pdf

GB 3544-2001 造纸工业水污染物排放标准 .pdf

HJ 821-2017 排污单位自行监测技术指南 造纸工业（发布稿）.pdf

HJ 821-2017 排污单位自行监测技术指南 造纸工业.pdf

猜你喜欢

ASTM D7172-2014 red 9377 Standard Test Method for Determining the Relative Density &40 Specific Gravity&41 and Absorption of Fine Aggregates Using Infrared《用于测定红外细骨料相对密度 (比重) 和吸收性的.pdf

ASTM D7173-2005 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt《从聚合物改性沥青中分离出聚合物的可能性的测定用标准实施规程》.pdf

ASTM D7173-2011 9375 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt《测定从聚合物改性沥青中分离出聚合物的可能性的标准操作规程》.pdf

ASTM D7173-2014 5857 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt《测定聚合物与聚合物改性沥青分离倾向的标准实施规程》.pdf

ASTM D7174-2005 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction《混凝土面层和结构建造用预制闭孔聚烯烃伸缩接头填充料的标准规范》.pdf

ASTM D7174-2005(2011) 0000 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction《铺筑混凝土路面和结构建筑用预制封闭气室式聚.pdf

ASTM D7174-2005(2016) 2220 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction《凝土面层和结构建造用预制闭孔聚烯烃伸缩接头.pdf

ASTM D7175-2005e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer《用动态剪切流变仪测定沥青粘结剂流变特性的标准试验方法》.pdf

ASTM D7175-2008 866 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer《用动态剪切流变仪测定沥青粘结剂流变特性的标准试验方法》.pdf