KS 03-155-1978 KENYA STANDARD SPECIFICATION FOR SODIUM CARBONATE TECHNICAL GRADES《肯尼亚碳酸钠技术等级标准规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D804-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的聚酰胺6冲击改性吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSK-M4D805-A-2013 POLYVINYL CHLORIDE (PVC) FOAM CLOSED CELL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D806-A-2008 ABS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD ESB-M4D483-A1 FORD ESB-M4D483-A1 FOR.pdf

FORD WSK-M4D807-A2-2006 POLYPHENYLENE SULFIDE (PPS) 40 % GLASS FIBER REINFORCED SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的聚苯硫醚(PPS)自熄灭型成型.pdf

FORD WSK-M4D808-A-2006 POLYPHENYLENE SULFIDE (PPS) 45% GLASS FIBER REINFORCED SELF EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的聚苯硫醚(PPS)自熄型成型料 .pdf

FORD WSK-M4D811-A-2010 POLYAMIDE (PA) 46 HEAT STABILIZED OIL IMPREGNATED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《油浸渍、受热稳定的聚酰胺46成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D817-A-2010 PERFLUORO ALKOXY (PFA) COPOLYMER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《全氟代烷氧基（PFA）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D818-A-2006 POLYPROPYLENE (PP) SHEET 40% CONTINUOUS GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%纺织玻璃纤维增强的聚丙烯（PP）平布 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D819-A-2008 POLYETHYLENE (PE) FOAM CROSSLINKED CLOSED CELL TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯泡沫机交联闭路电池(与WSS-M99P1111-A号福特材料一起使用)[用于WSS-M99P32-B号福特材料]》.pdf