KS 03-381-1983 KENYA STANDARD GENERAL METHODS OF TEST FOR PESTICIDES AND THEIR FORMULATIONS《肯尼亚杀虫剂和其他配方通用检测标准方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D619-A1-2005 POLYPROPYLENE (PP) SHEET 30% CONTINUOUS GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%纺织玻璃纤维增强的聚丙烯（PP）板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D619-A2-2011 POLYPROPYLENE (PP) SHEET 30% LONG GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D619-A1)《30%长玻璃纤维增强聚丙烯(PP)板 与福特WSS-M99P.pdf

FORD WSB-M4D619-A4-2011 POLYPROPYLENE (PP) SHEET 45% CONTINUOUS GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《45%连续玻璃纤维增强聚丙烯（PP)板 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D624-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED MOLDING COMPOUND 30% MINERAL GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物 玻璃纤维增强的聚对苯二.pdf

FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC）模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1053-A2]》.pdf

FORD WSB-M4D634-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND 16% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《16%玻璃纤维增强的聚苯醚（PPE）改性成型料 与标准FORD WSS-M9.pdf

FORD WSB-M4D636-A2-2012 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D638-A-2006 POLYPROPYLENE (PP) MOLDING COMPOUND COLOR PIGMENTED LOW GLOSS UV STABILIZED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《汽车内部用对紫外线稳定的低光泽.pdf

FORD WSB-M4D640-A-2010 POLYPROPYLENE (PP) IMPACT MODIFIED 35% CHEMICALLY COUPLED GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%化学交联玻璃纤维 .pdf