KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf

上传人:tireattitude366 文档编号:819566 上传时间:2019-02-11 格式:PDF 页数:37 大小:447.06KB
下载 相关 举报
KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf_第1页
第1页 / 共37页
KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf_第2页
第2页 / 共37页
KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf_第3页
第3页 / 共37页
KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf_第4页
第4页 / 共37页
KS M ISO 13226-2007 Rubber-Standard reference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers《测量轮胎均匀度的试验方法》.pdf_第5页
第5页 / 共37页
点击查看更多>>
资源描述

1、 KS M ISO 13226KSKSKSKSSKSKSKS KSKSKS SKSKS KSKS SKS KS (SREs)KS M ISO 13226 : 2007 2007 08 16 http:/www.kats.go.krKS M ISO 13226: 2007 : () ( ) () () () ( ) : (http:/www.standard.go.kr) : : 2007 08 16 2007-0504 : : ( 02-509-7301) (http:/www.kats.go.kr ). 7 5 , . KS M ISO 13226: 2007 i ii 1 1 2 1 3

2、.1 4 .2 5 .2 6 .2 7 .2 8 .2 A( ) : SRE ACM/1 SRE ACM/1X.3 B( ) : SRE NBR 28/P SRE NBR 28/PX5 C( ) : SRE NBR 28/S, SRE NBR 28/SX, SRE NBR 34/S SRE NBR 34/SX .9 D( ) : SRE NBR/M.14 E( ) : SRE NBR/L 15 F( ) : SRE CIIR/1 16 G( ) : SRE CR/1 .17 H( ) : SRE EPM/1 18 I( ) : SRE FKM/1 .19 J( ) : SRE FKM/2X.2

3、0 K( ) : SRE HNBR/1 SRE HNBR/1X.23 L( ) : SRE NR/1 .26 M( ) : SRE MQ/128 N( ) : SRE VMQ/1 SRE VMQ/1X29 KS M ISO 13226: 2007 ii 2005 2 ISO 13226, Rubber Standard reference elastomers(SREs) for characterizing the effect of liquids on vulcanized rubbers , . KS M ISO 13226 : 2007 (SREs) RubberStandard r

4、eference elastomers(SREs) for characterizing the effect of liquids on vuicanized rubbers . . . 1 . . , . , SRE . . 2 . . ( ) . KS M ISO 37, KS M ISO 1817, KS M ISO 2393, , KS M ISO 2781, KS M ISO 7619 1, 1 : ( ) ISO 48: 1994, Rubber, vulcanized or thermoplastic Determination of hardness(hardness bet

5、ween 10 IRHD and 100 IRHD) ISO 2230, Rubber products Guidelines for storage 3 KS M ISO 13226: 2007 2 KS M ISO 2393 . . , . , . , . 4 KS M ISO 2393 . , PTFE . 5 ISO 23539 (20.2) mm , . “ ” . “ ” . 6 ISO . . 5. . . . . (moulding blank) (milling) . 7 KS M ISO 13226 SRE A/B , KS M ISO 13226 SRE , ( ) A

6、, B . X . 8 ISO 2230 . , . , . KS M ISO 13226: 2007 3 A ( ) : SRE ACM/1 SRE ACM/1X A.1 SRE , ACM . , , , , . SRE , , , . A.2 A.1 SRE a100.0 1.0 b 2.0 c(ODPA) 2.0 , N550 65.0 4.0 4 d 2.0 176.0 aZeon Chemicals L.P. HyTemp 4051 . bSchill & Seilacher Struktol WB 222 . cBayer AG Vulkanox OCD/SG . dZeon C

7、hemicals L.P. HyTemp NPC 50 . A.3 (two roll mill) (A.6 ). A.4 12 48 . (1802) (101) . (1752) (40.5) . KS M ISO 13226: 2007 4 A.5 SRE ACM/1 A.2 . ( A.3 ). SRE ACM/1X . A.2 KS M ISO 1817 B % 26 29 KS M ISO 1817, (232) (220.5) 3 2 a / : 1/(30 5) aKS M ISO 37 . A.3 MPa % 12 16 140 220 KS M ISO 37, 5 2 Sh

8、ore A 69 74 KS M ISO 7619 1, 3 2 a, 3 IRHD 69 74 ISO 48, 3 2 a, 3 Mg/m31.30 1.34 KS M ISO 2781: 2002, A, 3 aKS M ISO 37 . A.6 SRE ACM/1X . : 200 mm : 395 mm : 18/22 1 : (705) : 650 g mm 0 2.00.5 , , ODPA 3/4 ( 4 ) 4 a 3/4 ( 6 ) (3 ). 1 11 13 17 19 21 2.20.5 : 75 a (61) . KS M ISO 13226: 2007 5 B ( )

9、 : SRE NBR 28/P SRE NBR 28/PX B.1 SRE , NBR . , , , , . SRE , , , . B.2 B.1 SRE a (280.5) % NBR 100.0 N (1,3 ) N p (6PPD)b0.5 c 5.0 , N550 70.0 (Dicumyl peroxide) 3.0 ( 40 %)d 178. 5 aBayer AG Perbunan NT 2845 . bBayer AG Vulkanox 4020 . cBayer AG Zinkoxyd aktiv . dAkzo Nobel Chmicals BV Perkadox BC

10、 40 . B.3 (internal mixer) (B.6.1 ). , (B.6.2 ). B.4 20 24 . KS M ISO 13226: 2007 6 (1702) (201) . B.5 SRE NBR 28/P B.2 . ( B.3 ). SRE NBR 28/PX . B.2 KS M ISO 1817 B % 25 28 KS M ISO 1817, (232) (220.5) 3 2 a / : 1/(305) aKS M ISO 37 . B.3 MPa % 20 25 170 220 KS M ISO 37, 5 2 Shore A 79 84 KS M ISO

11、 7619 1, 3 2 a, 3 IRHD 79 84 ISO 48, 3 2 a, 3 Mg/m31.21 1.25 KS M ISO 2781: 2002, A, 3 aKS M ISO 37 . B.6 SRE NBR 28/PX . B.6.1 (intermeshing blades) KS M ISO 13226: 2007 7 a: 4.6 dm3 : (655) %b c: 30 1 : 2 000 g 6PPD 0 2 3 8 : 120 a (wheat grans) b , (805)% . c : 250 mm : 410 mm : 0 13 : 12/18 1 14

12、 25 : 12/12 1 : (505) mm 3/4 ( 14 ) (8 ). 3/4 ( 2 ) 3/4 ( 5 ) (4 ). 3/4 ( 5 ) (4 ). 0 1 8 13 14 16 19 21 23 3.00.5 25 1.50.5 : 75 B.6.2 KS M ISO 13226: 2007 8 : 200 mm : 395 mm : 20/24 1 : (505) : 1 000 g mm 6PPD 3/4 ( 3 ) 0 3 4 2.00.5 6 17 3.20.5 3/4 ( 6 ) (4 ). 19 23 3.20.5 26 1.50.5 : 90 KS M ISO

13、 13226: 2007 9 C ( ) : SRE NBR 28/S, SRE NBR 28/SX, SRE NBR 34/S SRE NBR 34/SX C.1 SRE , (low sulfur) NBR . , , , , . , (ACN) SREs . KS M ISO 13226 SRE NBR 28/S SRE NBR 28/SX(ACN 28 %) KS M ISO 13226 SRE NBR 34/S SRE NBR 34/SX(ACN 34 %) SRE , , , . C.2 C.1 SRE 28/S 28/SX 34/S 34/SX NBR(ACN 28 %)a NB

14、R(ACN 34 %)b 2,2,4 1,2 (TMQ)c d , N550 (TMTD)eN 2 (CBS)f 100.0 2.0 5.0 1.0 65.0 2.5 1.5 0.2 100.0 2.0 5.0 1.0 65.0 2.5 1.5 0.2 177.2 177.2 aBayer AG Perbunan NT 2845 . bBayer AG Perbunan NT 3445 . cBayer AG Vulkanox HS/LG . dBayer AG Zinkoxyd aktiv .eBayer AG Vulkacit Thiuram/C . fBayer AG Vulkacit

15、CZ/C . KS M ISO 13226: 2007 10 C.3 TMTD, CBS (C.6.1 ). , 10 % . , . 30 24 (C.6.2 ). C.4 2 24 . (1602) (201) . C.5 SRE NBR 28/S SRE NBR 34/S C.2 . ( C.3 ). SRE NBR 28/SX SRE NBR 34/SX . C.2 28/S 28/SX 34/S 34/SX KS M ISO 1817 B % 26 29 17 20 KS M ISO 1817, (232) (220.5) 3 2 a / : 1/(305) aKS M ISO 37

16、 . C.3 28/SX 34/SX MPa % 20 25 300 400 20 25 300 400 KS M ISO 37, 5 2 Shore A 76 81 77 82 KS M ISO 7619 1, 3 2a, 3 IRHD 76 81 77 82 ISO 48, 3 2 a, 3 Mg/m31.19 1.23 1.20 1.24 KS M ISO 2781: 2002, A, 3 aKS M ISO 37 . KS M ISO 13226: 2007 11 C.6 SRE NBR 28/SX SRE NBR 34/SX . C.6.1 C.4 . , C.5 . 10 % C.

17、6 ( / ). C.5 2 , . C.4 , () a: 4.6 dm3 : (655) %b c: 30 1 : 2 000 g TMQ 0 2 3 8 : 120 a b , (805) % . c KS M ISO 13226: 2007 12 C.5 , () : 250 mm : 410 mm : 0 13 : 12/18 1 14 25 : 12/12 1 : (505) mm 3/4 ( 14 ) (8 ). 3/4 ( 2 ) , TMDT CBS 3/4 ( 5 ) (4 ). 3/4 ( 5 ) (4 ). 0 1 8 13 14 16 19 21 23 3.00.5

18、25 1.50.5 : 90 . , 90 . . C.6.2 , C.6 (805) ( ) . 30 , 24 . C.7 (505) . KS M ISO 13226: 2007 13 C.6 () : 200 mm : 395 mm : 20/24 1 : (805) : 1 000 g mm . 0 1 3/4 ( 3 ) 1 2 4 7 2.50.5 : 90 . , 90 . . C.7 ( C.6 )() : 200 mm : 395 mm : 20/24 1 : (505) mm . 3/4 ( 2 ) 3/4 ( 2 ) 0 1 2.5 3 5 2.50.5 6 3.20.

19、5 3/4 ( 4 ) TMDT CBS 3/4 ( 6 ) (4 ). 24 26 28 30 3.20.5 31 1.50.5 : 90 KS M ISO 13226: 2007 14 D ( ) : SRE NBR/M D.1 . D.2 D.1 SRE (ACN 33 %)a100 1.5 5.0 , N550 55( ) b (MBTS)c 1.9 2.0 165.4 a , Zeon Chemicals Europe Ltd Breon N33H80 . b80 % 20 % c75 % 25 % D.3 (1552) 20 15 . D.4 SRE NBR/M D.2 . D.2

20、 KS M ISO 1817 101 % 19 22 KS M ISO 1817, (1001) (4801) 3 . KS M ISO 13226: 2007 15 E ( ) : SRE NBR/L E.1 . E.2 E.1 SRE (ACN 18 %)a100 1.5 5.0 , N550 67( ) b (MBTS)c 1.9 2.0 177.4 aUniroyal Chemical Paracril 18.80 . b80 % 20 % c75 % 25 % E.3 (1552) 30 15 . E.4 SRE NBR/L E.2 . E.2 KS M ISO 1817 B % 53 59 KS M ISO 1817, (401) (4801) 3 . KS M ISO 13226: 2007 16 F ( ) : SRE CIIR/1 F.1 . F.2 F.1 SRE a100 1.5 5.0 , N550 N990b25( ) 120( ) c d (DEF STAN 91-44) (MBTS)d 0.94 0.67 3.0 3.0 1.33 260.44 aExxon 1066

展开阅读全文
相关资源
猜你喜欢
  • EN 603-2-1996 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 2 Mechanical Properties《铝和铝合金 锻造坯料 第2部分 机械性能》.pdf EN 603-2-1996 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 2 Mechanical Properties《铝和铝合金 锻造坯料 第2部分 机械性能》.pdf
  • EN 603-3-2000 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 3 Tolerances on Dimensions and Form《铝和铝合金 锻造坯料 第3部分 尺寸和形状公差》.pdf EN 603-3-2000 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 3 Tolerances on Dimensions and Form《铝和铝合金 锻造坯料 第3部分 尺寸和形状公差》.pdf
  • EN 6031-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties ( 45 ensile test)《航空航天系列 纤维增强塑料 测试方法 飞机内剪切性能的测定(± 45强度测试)》.pdf EN 6031-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties ( 45 ensile test)《航空航天系列 纤维增强塑料 测试方法 飞机内剪切性能的测定(± 45强度测试)》.pdf
  • EN 6032-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures《航空航天系列 纤维增强塑料 测试方法 玻璃化传导温度的测定》.pdf EN 6032-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures《航空航天系列 纤维增强塑料 测试方法 玻璃化传导温度的测定》.pdf
  • EN 6033-2015 en Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC《航空航天系列 碳纤维增强塑料 测试方法 层间断裂韧.pdf EN 6033-2015 en Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC《航空航天系列 碳纤维增强塑料 测试方法 层间断裂韧.pdf
  • EN 6034-2015 en Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC《航空航天系列 碳纤维增强塑料 测试方法 层间断.pdf EN 6034-2015 en Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC《航空航天系列 碳纤维增强塑料 测试方法 层间断.pdf
  • EN 6035-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength《航空航天系列 纤维增强塑料 测试方法 切口和无切口的拉伸强度的测定》.pdf EN 6035-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength《航空航天系列 纤维增强塑料 测试方法 切口和无切口的拉伸强度的测定》.pdf
  • EN 6036-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of notched unnotched and filled hole compression strength《航空航天系列 纤维增强塑料 测试方法 切口 无切口和填充孔压缩.pdf EN 6036-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of notched unnotched and filled hole compression strength《航空航天系列 纤维增强塑料 测试方法 切口 无切口和填充孔压缩.pdf
  • EN 6037-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength《航空航天系列 纤维加固塑料 试验方法 轴承强度》.pdf EN 6037-2015 en Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength《航空航天系列 纤维加固塑料 试验方法 轴承强度》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1