MI 13822 13-1984 《抗压盛器硬度计算 镜片补偿》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 94FTM7-1994 Allowable Surface Compressive Stresses of Gear Teeth Made of Cast Iron Tempered Carbon Steels and Tempered Alloys Steels《铸铁 回火碳钢和回火合金钢制轮齿的可允许表面压应力》.pdf

AGMA 94FTM8-1994 Reference Point Mesh Stiffness and Dynamic Behavior of Solid Semi-Solid and Thin Rimmed Spur Gears《固态 半固态和薄轮缘直齿齿轮的参考点 啮合刚度和动态性能》.pdf

AGMA 94FTM9-1994 Analytical and Experimental Vibration Analysis of a Damaged Gear《破损齿轮解析和实验震动分析》.pdf

AGMA 94FTMS1-1994 Computer-Aided Numerical Determination of Hofer Lewis Niemann and Colbourne Points《霍费尔 刘易斯 尼曼和科波尔尼点P的计算机辅助数值测定》.pdf

AGMA 95FTM1-1995 Detection of Hidden Runout 《 隐藏摆差 的检测》.pdf

AGMA 95FTM10-1995 Efficiency of High Contact Ratio Planetary Gear Trains《高重合度行星齿轮系的效率》.pdf

AGMA 95FTM11-1995 Feature-Based Definition of Bevel Gears《伞形齿轮基于功能的定义》.pdf

AGMA 95FTM12-1995 Flank Modifications in Bevel Gears Using a Universal Motion Concept《基于通用运动概念对伞形齿轮进行侧翼修改》.pdf

AGMA 95FTM13-1995 Powder Metallurgy Gears - Expanding Opportunities《粉末冶金齿轮.膨胀机会》.pdf