MI 18926-1987 《钢架木交叉底部塔式起重机轨道》.pdf

相关资源

DL T 5282-2012 水电水利工程施工机械安全操作规程 塔式起重机.pdf

JB T 11865-2014 塔式起重机车轮技术条件.pdf

JB T 10221-2010 YZRSW系列塔式起重机用涡流制动绕线转子双速三相异步电动机技术条件.pdf

JB T 11156-2011 塔式起重机 起升机构.pdf

JB T 11157-2011 塔式起重机 钢结构制造与检验.pdf

SLJJ 1-8-1981;DLJS 2-8-1981 施工机械安全技术操作规程 第八册 塔式起重机.pdf

JB T 8956-1999 YZTD系列塔式起重机用多速三相异步电动机 技术条件.pdf

JG T 72-1999 塔式起重机用限矩型液力偶合器.pdf

JGJ 196-2010 建筑施工塔式起重机安装、使用、拆卸安全技术规程.pdf

JB T 10221-2000 YZRSW系列塔式起重机用涡流制动绕线转子双速三相异步电动机技术条件.pdf

猜你喜欢

FORD WSK-M4D890-A1-2010 POLYAMIDE 12 (PA 12) COPOLYMER AMORPHOUS MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用聚酰胺12共聚物非定形成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D890-A2-2010 POLYAMIDE 6-3-T (PA6-3-T) AMORPHOUS MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用聚酰胺6-3-T（PA6-3-T）非定形成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSK-M4D892-A1-2010 POLYAMIDE 12 (PA12) HEAT STABILIZED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定20%玻璃纤维增强聚酰胺12(PA12)模塑材料 与福特WSS-M.pdf

FORD WSK-M4D893-A1-2010 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 66 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为66 D的热塑性聚酯-乙醚弹性体(TEEE)成型料 .pdf

FORD WSK-M4D893-A2-2006 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 66 DUROMETER D HARDNESS HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-.pdf

FORD WSK-M4D894-A1-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FOR.pdf

FORD WSK-M4D894-A2-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSK-M4D894-A2-2016 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSK-M4D894-A3-2006 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10 % GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-.pdf