MI 7099-1984 《账目的打印件，付款截止日的公开打印文件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 50148-1975 Tensile test pieces for non-ferrous metals pressure die castings《有色金属压铸件的抗拉伸试件》.pdf

DIN 50154-1980 Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0 179 mm《对厚度在0 179mm以下的铝和锻造铝合金薄片材和带材进行不用伸长计测量的.pdf

DIN 50157-1-2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1 Test method《金属材料 通过便携式测量仪的电穿透深度进行金属材.pdf

DIN 50157-2-2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2 Verification and calibration of the .pdf

DIN 50158-1-2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1 Test method《金属材料 通过便携式测量仪的电穿透深度进行金属材.pdf

DIN 50158-2-2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2 Verification and calibration of the .pdf

DIN 50159-1-2015 Metallic materials - Hardness testing with the UCI method - Part 1 Test method《金属材料 UCI法的硬度试验 第1部分 试验方法》.pdf

DIN 50159-2-2015 Metallic materials - Hardness testing with the UCI method - Part 2 Verification and calibration of the testing devices《金属材料 UCI法的硬度试验 第2部分 试验装置的检验和校准》.pdf

DIN 5016-1994 Business forms - Delivery schedule《商务表格 交付进度表》.pdf