MI 74-1969 《合金铝和电器的使用》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESA-M4D429-A2-2008 POLYAMIDE (PA) 6 MINERAL FILLED - EXTERIOR - PAINTED TO BE USED WITH FORD WSS-M99P1111-A (Shown on ESA-M4D429-A1)《矿物填充经喷涂外部用聚酰胺(PA)6(和FORD WSS-M99P1111-A一.pdf

FORD ESA-M4D429-A3-2008 POLYAMIDE (PA) 6 MINERAL FILLED - EXTERIOR - PAINTED TO BE USED WITH FORD WSS-M99P1111-A (Shown on ESA-M4D429-A1)《矿物填充经喷涂外部用聚酰胺(PA)6(和FORD WSS-M99P1111-A一.pdf

FORD ESA-M4D429-A4-2010 NYLON 6 34% MINERAL FILLED - HEAT STABILIZED - HIGH IMPACT EXTERIOR PAINTED TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用受热稳定的高抗冲34%矿物填充的涂漆尼龙6 与标准FORD WSS-M.pdf

FORD ESA-M4D430-A-2006 POLYAMIDE 6 (PA6) HEAT STABILIZED LOW FLEXURAL MODULUS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的低挠曲模量聚酰胺6成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD ESA-M4D433-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《吹塑成型热塑性聚烯烃弹性体 与福特WSS-M99P1111-A 一起使用#》.pdf

FORD ESA-M4D434-A1-2010 STYRENE MALEIC ANHYDRIDE TERPOLYMER (SMA) MODIFIED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《通用苯乙烯马来酐三元共聚物(SMA)改性成型料 与标准FORD .pdf

FORD ESA-M4D465-A1-2011 TUBING PTFE - GLASS SPHERE FILLED TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯玻璃填充管材 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESA-M4D465-A2-2011 TUBING PTFE - POLYPHENYLENE SULFIDE FILLED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESA-M4D465-A1)《聚四氟乙烯聚亚苯基硫醚填充管材 与福特WSS-M99P1111-A 一起使用 在福特E.pdf

FORD ESA-M4D472-A-2006 POLYPROPYLENE COPOLYMER INJECTION MOLDED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-C)《聚丙烯（PP）共聚物注塑塑料 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D638-C》.pdf