MS 1532-2002 Thermal insulation-determination of steady-state thermal transmission properties-Calibrated and guarded hot box(ISO 8990 1994 mod).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 13916-1996 en Welding - Guidance on the Measurement of Preheating Temperature Interpass Temperature and Preheat Maintenance Temperature《焊接 预热温度 道间温度和预热维持温度测量的指南 ISO 13916-19.pdf

EN ISO 13916-2017 en Welding - Measurement of preheating temperature interpass temperature and preheat maintenance temperature.pdf

EN ISO 13918-2008 en Welding - Studs and ceramic ferrules for arc stud welding《焊接 电弧螺柱焊接用螺柱和陶瓷套圈》.pdf

EN ISO 13918-2018 en Welding - Studs and ceramic ferrules for arc stud welding.pdf

EN ISO 13919-1-1996 en Welding - Electrons and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1 Steel《焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分 钢 ISO 13919-1-1996.pdf

EN ISO 13919-2-2001 en Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 Aluminium and its weldable alloys (Incorporates Amend.pdf

EN ISO 13920-1996 en Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position《焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置》.pdf

EN ISO 13927-2015 en Plastics - Simple heat release test using a conical radiant heater and a thermopile detector《塑料 用锥形辐射加热器和热电堆探测器进行简单热释放试验(ISO 13927 2015)》.pdf

EN ISO 13929-2001 en Small Craft - Steering Gear - Geared Link Systems《小艇 转向齿条 齿条链系统 ISO 13929-2001》.pdf