MS 647-1999 SPECIFICATION FOR SODIUM HYPOCHLORITE SOLUTIONS (FIRST REVISION)《次氯酸钠浓液规范(第1次修订)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 386.1-1989 锥柄莫氏圆锥和公制圆锥铰刀 莫氏圆锥号0～6 公制圆锥号4～6.pdf

QJ 386.2-1989 直柄莫氏圆锥和公制圆锥铰刀 莫氏圆锥号0～6 公制圆锥号4～6.pdf

QJ 39-1987 通用零件 带活动手柄压紧螺钉.pdf

QJ 390-1978 直柄带导向平底锪钻(D=4～20).pdf

QJ 391-1978 锥柄带导向平底锪钻(D=14～32).pdf

QJ 392-1978 套装式平底锪钻用导柱(d=11.9～37.5).pdf

QJ 393-1978 套装式平底锪钻(D=33～52).pdf

QJ 394-1978 套装式平底锪钻用刀杆(D=30～40).pdf

QJ 395-1978 沉头铆钉孔反锪钻(铆钉直径=3～6,ψ=90°、120°).pdf