MS 672-1999 Specification of rubber seals in water supply drainage and sewerage plpelines (first revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 10510-1986 Pneumatic drives power NON-RETURN VALVES pn 10 bar asic dimensions《气动驱动器电力止回阀pn10巴 基本尺寸 》.pdf

STAS 10511-1986 Pneumatic drives power PRESSURE RELAY pn 10 bar Types and basic dimensions《气动驱动器电力压力继电器pn10巴 类型和基本尺寸 》.pdf

STAS 10512 0-1983 Hyrdaulic drives MULTIDIRECTIONAL CONTROL VALVES Symbols《液压驱动器多方位控制阀符号 》.pdf

STAS 10512 1-1980 Hydraulic drives MULTIDIRECTIONAL CONTROL VALVES INLET SECTION Types and basic dimensions《液压驱动器 多方位控制阀 入口剖面类型和基本尺寸 》.pdf

STAS 10512 2-1976 Hydraulic drives MULTIDIRECTIONAL CONTROL VALVES WORKING SECTION Types and basic dimensions《液压驱动器 多方位控制阀工作剖面类型和基本尺寸 》.pdf

STAS 10512 3-1980 Hydraulic drives MULTIDIRECTIONAL CONTROL VALVES OUTLET SECTION Types and basic dimensions《液压驱动器 多方位控制阀出口剖面 类型和基本尺寸 》.pdf

STAS 10512 4-1980 Hydraulic drives MULTIDIRECTIONAL CONTROL VALVES HAND CONTROL SECTION Types and basic dimensions《液压驱动 多向控制阀 手控部类型和基本尺寸》.pdf

STAS 10512 5-1980 Hydraulic drives MULTIPLE DIRECTIONAL CONTROL VALVES AUTOMATIC RETURN SECTION Types and basic dimensions《液压驱动器多换向控制阀自动返回截面 类型和基本尺寸 》.pdf

STAS 10512-1988 Hydraulic fluid power EIGHT-PORT DIRECTIONAL MULTIPLE CONTROL VALVES NP 315 bar Main dimensions《液压传动 8端口定向控制阀NP315主要尺寸 》.pdf