1、CHECK THE MASTER LIST at https:/repository.msfc.nasa.gov/directives/directives.htm VERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE MWI 3410.1 REVISION I EFFECTIVE DATE: October 1, 2008 EXPIRATION DATE: October 1, 2013 MARSHALL WORK INSTRUCTION QD01 PERSONNEL CERTIFICATION PROGRAM Provided by IHSN
2、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Marshall Work Instruction QD01 Personnel Certification Program MWI 3410.1 Revision: I Date: October 1, 2008 Page 2 of 70 CHECK THE MASTER LIST at https:/repository.msfc.nasa.gov/directives/directives.htm VERIFY THAT TH
3、IS IS THE CORRECT VERSION BEFORE USE DOCUMENT HISTORY LOG Status (Baseline/ Revision/ Canceled) Document Revision Effective Date Description Baseline 5/14/99 Document converted from MSFC-P18.1-C01 to a Directive. Previous history retained in system as part of canceled or superseded ISO Document file
4、s. Revision A 8/16/99 Changed scope to limit personnel certification to work on flight or flight-associated hardware. Added requirement for disposition of records after retention period. Updated for changes due to reorganization. Clarified in paragraphs 1 and 2 that hazardous operations that do not
5、already require certification must be evaluated by S Changed Laser Operator to Class 3B; Modified Lifting Equipment Examiner (Proficiency Test Examiner); Modified PCH S added new safety certifications for Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
6、-,-Marshall Work Instruction QD01 Personnel Certification Program MWI 3410.1 Revision: I Date: October 1, 2008 Page 3 of 70 CHECK THE MASTER LIST at https:/repository.msfc.nasa.gov/directives/directives.htm VERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE Inert/Asphyxiate Gases and Liquids, Hydrog
7、en Handlers, Oxygen Handlers, and Oxygen Users. Modified note (1) to add date of training must be listed on MSFC Form 4083. Modified note number (3) to state that Lockout/Tagout procedures must be reviewed according to 29 CFR 1910.147. Updated NASA-STD references in the titles of MSFC-STDs listed in
8、 the applicable documents. Changed Thermography Testing to Thermal/Infrared Testing and clarified requirement. Clarified the certification requirements for NDE Level III in the definitions and in Appendix A. Combined certification requirements for plated-through hole and surface mount technology sol
9、dering in Table B-1. Revision E 11/8/2004 Revised per HQ Rules Review. Pg. 4, Para. 2. APPLICABILITY, replace will typically be certified with shall be certified. Replace However, all contractors with Additionally, all contractors. Pg. 6, 5.3 CERTRAK, data base is revised to read one word database P
10、g. 6, Para. 5.3 CERTRAK, add Civil Service and Contractoremployee certification records. Pg. 6, Para. 5.4, Contractor Certifying Officer, replace issue safety certifications with approvePg. 6, Para. 5.5 Employee and Organizational Development Department (EODD) add provides personnel certification ed
11、ucation and training to civil service and contractor personnel. Pg. 7, Para. 5.11, OJT Training, delete certified operator who supervised operator for 3 months, and add supervisor, delete signature of, .should read signature of supervisor and applicant. Pg. 8, change to read not to exceed 12 months.
12、 Pg. 9, Para. add 6.1.3.1, Ensure that training assessments are completed for all personnel certification specialties. Renumber paras. 6.1.3.2-6.1.3.4, Pg. Pg. 12, change to read or in a location nearby the operation for which the certification is necessary. Pg. 10, Para. 6.2.1, Safety Certification
13、, delete and certification programs. Also delete obtain formal training, OJT, physical examinations, and written and proficiency examinations as required by Table 1. and add comply with Table 1 certification requirements. Pg. 10, Para. 6.3 Contractor Requirements, delete the, training, to read deter
14、mine the safety and certification training required. Also delete the to readdefine other specialties/operations. Pg. 10, Para. 6.3, Contractor Requirements, delete Contractor programs must satisfy the intent and requirements of this Instruction. Pg. 10, Para. 6.3.2, change to .affected employees hav
15、e training assessments and certifications. Delete receive safety training and certification. Delete issue company certifications or. Pg. 17, Delete OSHA 501 from PCH-S Updated the “APPLICABILITY” section by revising the first sentence as follows: deleted “at MSFC engaged in” added “performing”, dele
16、ted Table 1 added Appendix A, deleted S In second sentence deleted “that MSFC Safety and Mission Assurance (S In third sentence added “to include university and grant personnel” deleted “or” added “and”; Updated the “APPLICABLE DOCUMENTS” section by performing the following: 1) Deleted MSFC-SPEC-445
17、, “Adhesive Bonding, Process, and Inspection Requirements” because there are no certification training courses or certified instructors available for this process., 2) Deleted MSFC-STD-2907, “Workmanship Standard for Printed Wiring Boards” because this document applies to the manufacture of printed
18、wiring board products and not to electrical process skills Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Marshall Work Instruction QD01 Personnel Certification Program MWI 3410.1 Revision: I Date: October 1, 2008 Page 5 of 70 CHECK THE MASTER LIST
19、at https:/repository.msfc.nasa.gov/directives/directives.htm VERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE (EPS)., 3) Added NAS 410, “National Aerospace Standard (NAS) Certification and Qualification of Nondestructive Test Personnel” because this is the actual standard that applies to the train
20、ing requirements for MSFC Level I and Level II personnel., added NPR 1441.1 “NASA Record Retention Schedule (NPRS)” and 4) Renumbered the paragraphs in the “APPLICABLE DOCUMENTS” section; Updated the “DEFINITIONS” section by performing the following: 1)Revised paragraphs 5.1, 5.3, 5.4, 5.5, 5.6 5.7,
21、 5.9, 5.10, 5.11, 5.11.1, 5.11.2, 5.12, 5.13, 5.14, 5.15, 5.16, 5.21, 5.22, 5.23., 2) Added the definition for “Technical Advisor”, and 3) Renumbered the paragraphs in the “DEFINITIONS” section; Updated the “INSTRUCTIONS” section by revising paragraphs 6.1.1, 6.1.2 ,6.1.3.1, 6.1.3.2, 6.1.3.3, 6.1.3.
22、4, 6.1.3.5, 6.1.3.6, 6.1.4, 6.2.1, 6.2.2, 6.3, 6.3.1, 6.3.3, 6.3.4, 6.3.5; Deleted all notes in Section 7 and replaced with “None;” Updated the “RECORDS” section by revising paragraphs 9. RECORDS, 9.1, 9.2, 9.3, 9.4, 9.5, 9.6, 9.7, 9.8; Revised 12. CANCELLATION to cancel previous MWI 3410.1 version
23、and effective date. Added Lockout/Tagout note for Appendix A. Added Appendix B, added NOTES FOR APPENDIX B; Deleted NOTES FOR APPENDIX A (1), (2), (3), (4); Updated “Appendix C” by deleting the following test methods, document, and processes: “Acoustic Emissions Testing”, “Thermal/Infrared Testing”,
24、 “Computed Tomography”, “Adhesive Bonding Application”, “MSFC-STD-445”, and “Wire Wrap”. There are no certification training courses or certified instructors available for the test methods, per the document requirements, or for the two processes listed above; Also, updated the “REQUIREMENTS” column
25、of APPENDIX C; Updated “APPENDIX D” section D.1 titled “PURPOSE” by replacing “NDT” with “Nondestructive Testing/Nondestructive Evaluation (NDT/NDE)”, and by deleting items f, g, and h for “Acoustic Emissions Testing (AE)”, “Thermal/Infrared Testing (TIR)”, and “Computed Thermography (CT)”, respecti
26、vely; Revised paragraph D1.1 titled “Exceptions” by deleting the last sentence; Revised paragraphs D1.2 and D1.3; Updated section D.2 titled “TRAINING AND EXPERIENCE REQUIREMENTS” by performing the following: 1) Added the following after the first sentence: “All NDT training shall comply with the re
27、quirements of NAS 410, NAS Certification and Qualification of Nondestructive Test Personnel, except as noted herein.”, 2) Deleted “1996” from “SNT-TC-1A”, 3) Deleted paragraph A.2.1 titled “Specialist Personnel” in its entirety, 4) Revised paragraphs D.2.2, D.2.4, D.2.5, D.2.6, and D.2.6.1a, and 5)
28、Renumbered all paragraphs in section D.2; Replaced “Table A-1” with “Table D-1” and updated “APPENDIX D-1 by performing the following: 1) Deleted all entries for Examination Methods “AE”, “CT”, “TIR”, 2) Deleted Notes 1-3 of TABLE D-1; Update section D.3 titled “CERTIFICATION” by revising paragraphs
29、 D.3.2 and D.3.3; Updated “APPENDIX E” section E.1 titled “PURPOSE” by deleting the following sentence: “These requirements also apply when other program/industry documents are used that require personnel certification.”; Updated paragraph E.1.2.1 by replacing “Table B-1” with “Appendix E-1”; Update
30、d paragraph E.1.2.2 by replacing “examiners” with “technical advisors”; Revised paragraph E.2.1 titled “Training Organization” as follows: “Training shall be obtained from a school approved by a technical advisor and the MSFC Certifying Officer. Other agencies, which may be used for training, shall
31、be subject to review and approval by the technical advisor and MSFC Certifying Officer.”; Updated paragraph E.2.2 titled “Lesson Plans” by replacing “examiner” with “technical advisor”; Revised paragraph E.2.3 titled “Instructor Qualifications” as follows: “Instructors shall be recognized experts in
32、 their field. Instructors shall be evaluated to requirements of the EPS documents specified herein, as determined by the MSFC Certifying Officer and technical advisor.”; Updated paragraph E.2.4.1 by performing the following: 1)Replace “Table B-1” with “Appendix E-1”, 2) Replace “examiner” with “tech
33、nical advisor”, 3) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Marshall Work Instruction QD01 Personnel Certification Program MWI 3410.1 Revision: I Date: October 1, 2008 Page 6 of 70 CHECK THE MASTER LIST at https:/repository.msfc.nasa.gov/direc
34、tives/directives.htm VERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE Replace “Certifying Officer” with “MSFC Certifying Officer”, and 4) Delete the words “except printed wiring board, (PWB) inspection” from the last sentence of the paragraph; Add the following after the last sentence of the parag
35、raph “Also, for surface mount technology (MSFC-STD-2904), operator certification shall require additional training on the exact machine used for production at the supervisors discretion.”; Updated paragraph E.2.4.2 titled “Examinations” by replacing “examiner” with “instructor”, and by deleting the
36、last sentence of the paragraph; Updated paragraph E.2.4.2b titled “Written Examination” by deleting the last sentence of the paragraph; and revising as follows: “For initial certification, each candidate shall score at least 80 percent on a written exam typically consisting of at least 25 questions.
37、”; Updated paragraph E.2.4.2c titled “Practical Examination” by deleting the words “and PWB inspection” from the first sentence of the paragraph, and revising the last sentence of the paragraph as follows: “As an option to the practical exam, proficiency demonstration can also be accomplished by a s
38、upervisor and MSFC Certifying Officer audit of actual work performed provided the audit results are documented and included in the employees personnel certification file.”; Updated paragraph E.3.1 by revising the first sentence as follows: “Candidate civil service personnel who meet the above criter
39、ia shall be certified by the MSFC Certifying Officer upon the recommendations of their supervisors. Contractor personnel shall.”; Updated “TABLE E-1” by deleting all entries for “Wire wrap” and “PWB Inspection”, and by deleting Note 1 and Note 5 and all superscripts. Also, updated the “RECERT” colum
40、n of TABLE E-1 by adding “See E3.2.b” for ESD control; Revised paragraph E.3.2 titled “Recertification” as follows: “Training for recertification shall be required at the discretion of individuals supervisor. Recertification shall include a demonstration of proficiency in accordance with E.3.2.1.”,
41、a. “Recertification of electrical process skills (EPS) operators and inspectors shall be required every 3 years except for ESD.”, b. “ESD recertification shall be required at the discretion of the individuals supervisor based on personnel performance, the use of new technology, or when requirement v
42、iolations are observed.”, c. “When necessary, the MSFC Certifying Officer shall extend or limit the certification period based on recommendations of the individuals supervisor. Extensions may not exceed 6 months.”, d. “EPS proficiency examiners/instructors shall be recertified every 2 years except f
43、or ESD.”; Revised paragraph E.3.2.1 as follows: “Demonstration of proficiency shall be required for recertification. This may be achieved by fabrication/inspection of samples, completion of a refresher training course approved by the technical advisor, or by auditing an individuals actual work perfo
44、rmed by the MSFC Certifying Officer and their supervisor. Recertification may also include a written examination.” Updated paragraph E.3.2.2 by revising the last sentence as follows: “The method chosen for recertification shall be the responsibility of the individuals supervisor.” Deleted paragraph
45、B.3.2.3 in its entirety; Updated paragraph E.3.3.5 by revising as follows: “Job function has changed and new function does not require EPS.” Revision G 11/02/2006 Complete rewrite to better define the certification process and place one “shall” per paragraph; Added the word “Test” to the document ti
46、tle in paragraph 3.20; On page 24, changed “Skill” to “Skills” for Appendix C; In paragraph D.1.1 titled “Exceptions”, changed “electro-mechanical” to “electromechanical”. Changed “may” to “can” in paragraph D.2.2.3 (e); Changed “may” to “can” in the second and last sentences of paragraph D.2.6; Rev
47、ised the second sentence of paragraph E.2.1 as follows: “Other agencies used for training shall be subject to review and approval by the technical advisor and the MSFC Certifying Officer.”; Changed “may” to “can” in the third sentence of paragraph E.2.4.2 (c); Changed “may” to “shall” in the last se
48、ntence of paragraph E3.2 (c); Changed “may” to “can” in the second and last sentences of paragraph E3.2.1; Deleted an extra “space” in paragraph E3.3.5. Acronym listed added. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Marshall Work Instruction Q
49、D01 Personnel Certification Program MWI 3410.1 Revision: I Date: October 1, 2008 Page 7 of 70 CHECK THE MASTER LIST at https:/repository.msfc.nasa.gov/directives/directives.htm VERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE Section 6.6 revised. Section 6.1.1.3 however, they are recognized as experts in their field. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
