MSZ 04 30 2-1972 《MSZ－04 30 2－72 地板砖材料的质量要求和检测 pvc板 KL类型产品》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R 9 915-2010 Unified system of corrosion and ageing protection Metals alloys coatings products Test methods of hydrogen embrittlement《腐蚀和老化联合防护系统 金属 合金 涂层 产品 氢脆化测试方法》.pdf

GOST R EN 1005-1-2008 Safety of machinery Human physical performance Part 1 Terms and definitions《机械的安全性 人体性能 第1部分 术语和定义》.pdf

GOST R EN 1010-2-2011 Printing trades machinery Safety requirements for the design and construction Part 2 Printing and varnishing machines including pre-press machinery《印刷行业机械 设计与.pdf

GOST R EN 1010-4-2011 Printing trades machinery Safety requirements for the design and construction Part 4 Bookbeinding paperconverting and finishing machines《印刷行业机械 设计与结构的安全性要求 第4.pdf

GOST R EN 1010-5-2012 Printing machinery Safety requirements for design and construction Part 5 Machines for the production of corrugated board and machines for the conversion of f.pdf

GOST R EN 1034-1-2012 Papermaking and finishing machines Safety requirements for the design and construction Part 1 General requirements《造纸机和修整机 设计和建造的安全要求 第1部分 通用要求》.pdf

GOST R EN 1177-2013 Impact attenuating playground surfacing Determination of critical fall height《冲击减震游乐场铺面 临界跌落高度的测定》.pdf

GOST R EN 12083-2011 Occupational safety standards system Respiratory protective devices Filters with breathing hoses (filters with hoses) Particle filters gas filters and combined.pdf

GOST R EN 12098-4-2012 Measuring operating and control for heating systems Part 4 Optimum start-stop control equipment for electrical system《加热系统用测量 操作和控制器 第4部分 电气系统用最佳启-停控制设备》.pdf