MSZ 05 26 1526-1982 《可沉降的连接物下的横向表面》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4285-1983(2006) Standard Test Method for Indicating Oil or Water in Compressed Air《压缩空气中指示油或水的标准试验方法》.pdf

ASTM D4285-1983(2012) Standard Test Method for Indicating Oil or Water in Compressed Air 《压缩空气中指示油或水的标准试验方法》.pdf

ASTM D4285-1983(2018) Standard Test Method for Indicating Oil or Water in Compressed Air.pdf

ASTM D4286-1990(1999) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《核动力发电机装置涂覆承包人的资格鉴定》.pdf

ASTM D4286-2008 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《核动力发电机装置用涂覆承包人资格鉴定的标准实施规程》.pdf

ASTM D4286-2008(2015) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities《鉴定核动力发电机装置的涂覆承包人资格的标准实施规程》.pdf

ASTM D4287-2000(2005) Standard Test Method for High-Shear Viscosity Using a Cone Plate Viscometer《用锥板粘度计测定高速剪切粘度的标准试验方法》.pdf

ASTM D4287-2000(2010) Standard Test Method for High-Shear Viscosity Using a Cone Plate Viscometer《用锥板粘度计测定高速剪切粘度的标准试验方法》.pdf

ASTM D4287-2000(2014) Standard Test Method for High-Shear Viscosity Using a Cone Plate Viscometer《采用椎体 平板粘度计的高剪切粘度的标准试验方法》.pdf