MSZ 05 29 6401-1978 《螺丝》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6081-1998(2004) Standard Practice for Aquatic Toxicity Testing of Lubricants Sample Preparation and Results Interpretation《润滑剂水中毒性试验的标准操作规程 样品制备和结果判断》.pdf

ASTM D6081-1998(2009) 0625 Standard Practice for Aquatic Toxicity Testing of Lubricants Sample Preparation and Results Interpretation《润滑剂水中毒性试验的标准实施规程 样品制备和结果判断》.pdf

ASTM D6081-1998(2014) 3109 Standard Practice for Aquatic Toxicity Testing of Lubricants Sample Preparation and Results Interpretation《润滑剂水中毒性试验的标准实施规程 样品制备和结果解释》.pdf

ASTM D6082-2006 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils《润滑油高温起泡特性的标准试验方法》.pdf

ASTM D6082-2011 5000 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils《润滑油高温起泡特性的标准试验方法》.pdf

ASTM D6082-2012 red 0000 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils《润滑油高温发泡特性的标准试验方法》.pdf

ASTM D6082-2012(2017) 3125 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils《润滑油抗高温起泡性能的标准试验方法》.pdf

ASTM D6083 D6083M-2018 2500 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing.pdf

ASTM D6084 D6084M-2013 1245 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer《用延度仪测定沥青弹性回复的标准试验方法》.pdf