MSZ 1034-1963 《汽油灭火器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M18P17-A-2007 COATING ALUMINUM WATER SHEDDING HYDROPHILIC TO BE USED WITH FORD WSS-M99P1111-A 《亲水性分水用铝涂料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M18P18-A-2003 ADHESIVE TAPE RIVETABLE THERMAL CURE STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A 《结构用热固化可铆定胶带 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M18P19-A-2006 SEALER HEAT EXPANDING LOWER EXPANSION HIGH TEMPERATURE CURE NON WELDABLE PERFORMANCE REQUIREMENT TO BE USED WITH FORD WSS-M99P1111-A 《不可焊接的高温固化低膨胀性热膨胀密封剂 性.pdf

FORD WSS-M18P19-A-2015 SEALER HEAT EXPANDING LOWER EXPANSION HIGH TEMPERATURE CURE NON WELDABLE PERFORMANCE REQUIREMENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M18P20-A1-2016 PREFORMED SEALER TAPE HEAT CURING PAINTABLE PERFORMANCE REQUIREMENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M18P20-A1-2017 PREFORMED SEALER TAPE HEAT CURING PAINTABLE PERFORMANCE REQUIREMENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M1A176-B2-2004 GRAY IRON BRAKE COMPONENTS DRUMS AND ROTORS CLASS 30 TO BE USED WITH FORD WSS-M99P1111-A 《刹车部件、刹车鼓和刹车盘用30级灰口铁 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M1A176-B3-2004 GRAY IRON BRAKE COMPONENTS DRUMS AND ROTORS LOW STRENGTH HIGH CARBON EQUIVALENT TO BE USED WITH FORD WSS-M99P1111-A 《制动部件、制动鼓和制动盘用低强度高碳当量的灰口铁 与标准FORD WSS.pdf

FORD WSS-M1A176-E1-2017 GRAY IRON BRAKE COMPONENTS DRUMS AND ROTORS TO BE USED WITH FORD WSS-M99P1111-A .pdf