MSZ 1040 2-1985 《灭火器，设备类型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2098-1-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 1 - General Requirements Edition 2《航空航天系列.钛和.pdf

AECMA PREN 2098-2-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 2 - Inspection and Testings Requirements for.pdf

AECMA PREN 2098-3-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 3 - Inspection and Testing Requirements for .pdf

AECMA PREN 2098-4-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 4 - Inspection and Testing Requirements for .pdf

AECMA PREN 2098-5-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 5 - Inspection and Testing Requirements for .pdf

AECMA PREN 2098-6-1994 Aerospace Series Inspection and Testing Requirements for Titanium and Heat Resisting Alloy Wrought Products Part 6 - Inspection and Testing Requirements for .pdf

AECMA PREN 2100-1980 Aluminium Alloy 2014A- T451 - Bars and Sections a Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天系列.2014A- T451板和块a小于或等于200mm.第1版》.pdf

AECMA PREN 2103-1988 Steel Nickel Base and Cobolt Base Alloy Remelting Stock and Castings - Technical Specification - Part 1 - General Requirements《钢镍基和钴基合金重熔模具和铸件交货技术条件.第1部分 基本要求》.pdf

AECMA PREN 2103-2-1988 Aerospace Series Steel Nickel Base and Cobalt Base Alloy Remelting Stock and Castings - Technical Specification - Part 2 - Remelting Stock Edition 1《航空航天系列钢、.pdf