MSZ 105 25 lap-1967 《钢材和金属强度测试的最后一步高温下的测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SN T 1653-2005 进出口皮革及皮革制品中铅、镉含量的测定 火焰原子吸收光谱法.pdf

SN T 1654-2005 进出口皮革及皮革制品中2，3，5，6-四氯苯酚残留量的测定 乙酰化气相色谱法.pdf

SN T 1655-2005 进出口氟苯检验方法.pdf

SN T 1656-2005 检验检疫设备完好通用检查方法.pdf

SN T 1657.1-2007 进出口电动工具检验规程 第1部分：通用要求.pdf

SN T 1657.2-2005 进出口电动工具检验规程 第2部分：电链锯.pdf

SN T 1657.3-2006 进出口电动工具检验规程 第3部分：手持式电刨.pdf

SN T 1657.4-2006 进出口电动工具检验规程 第4部分：电动往复锯.pdf

SN T 1657.5-2006 进出口电动工具检验规程 第5部分：手持式电动木铣与手持式电动修边机.pdf