MSZ 1466-1957 《铸造的光滑按钮、开关》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 14316-1-2004 en 3171 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1 Specification for bonded and .pdf

DIN EN 14316-2-2007 de 3833 Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 Specification for the install.pdf

DIN EN 14317-1-2004 en 5874 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1 Specification for bonde.pdf

DIN EN 14317-2-2007 de 7700 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2 Specification for the i.pdf

DIN EN 14318-1-2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1 Specification fo.pdf

DIN EN 14318-2-2013 en 2178 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2 Specific.pdf

DIN EN 14319-1-2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) f.pdf

DIN EN 14319-2-2013 en 5175 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate.pdf

DIN EN 1432-1997 Swap bodies - Swap tanks - Dimensions requirements test methods operation conditions German version EN 1432 1997《交换容器 交换罐 尺寸、要求、试验方法、操作条件》.pdf