MSZ 192-1983 《多孔板筛试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25387-1982 Complete filled transport packages Rolling and topping tests《运输用容器 自由坠落冲击试验法》.pdf

GOST 25388-2001 Chemical fibres Packing marking transportation and storage《化学纤维 包装，标志，运输和保管》.pdf

GOST 25389-1993 Alumina Preparation of test samples《铝矾土 试样制备方法》.pdf

GOST 25390-1993 Alumina Method for the determination of calcium oxide《铝矾土 氧化钙含量测定法》.pdf

GOST 25393-1990 Hard metal brazed tips for cutting tools Types《切削刀具用钎焊硬质合金刀片 型号》.pdf

GOST 25394-1990 Hard metal brazed tips type 50 Design and dimensions《50型钎焊硬质合金刀片 结构及尺寸》.pdf

GOST 25395-1990 Hard metal brazed tips types 01 02 61 62 Design and dimensions《01，02，61，62，型钎焊硬质合金刀片 结构及尺寸》.pdf

GOST 25396-1990 Hard metal brazed tips types 10 70 Design and dimensions《10，70型钎焊硬质合金刀片 结构及尺寸》.pdf

GOST 25397-1990 Hard metal brazed tips types 06 66 Design and dimensions《06，66型钎焊硬质合金刀片 结构及尺寸》.pdf