MSZ 198-1982 《冷冻淡水》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2245-2-2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 2 For holes over 40 mm up to 65 mm nominal diameter《产品几何量技术规范(GPS) 界限塞规 第2部分 标称直径40～65mm的孔》.pdf

DIN 2246-1-2008 Geometrical product specifications (GPS) - GO plug gauges - Part 1 For holes from 1 mm up to 40 mm nominal diameter《产品几何量技术规范(GPS) 过端塞规 第1部分 标称直径1～40mm的孔》.pdf

DIN 2246-2-2008 Geometrical product specifications (GPS) - GO plug gauges - Part 2 For holes over 120 mm up to 200 mm nominal diameter《产品几何量技术规范(GPS) 过端塞规 第2部分 标称直径120～200mm的孔》.pdf

DIN 2246-3-2008 Geometrical product specifications (GPS) - GO plug gauges - Part 3 For holes over 40 mm up to 120 mm nominal diameter《产品几何量技术规范(GPS) 过端塞规 第3部分 标称直径40～120mm的孔》.pdf

DIN 2247-1-2008 Geometrical product specifications (GPS) - NOT GO plug gauges - Part 1 For holes from 1 mm up to 40 mm nominal diameter《产品几何量技术规范(GPS) 不过端塞规 第1部分 标称直径1～40mm的孔》.pdf

DIN 2247-2-2008 Geometrical product specifications (GPS) - NOT GO plug gauges - Part 2 With rod gauge for holes over 40 mm up to 500 mm nominal diameter《产品几何量技术规范(GPS) 不过端塞规 第2部分.pdf

DIN 2247-3-2008 Geometrical product specifications (GPS) - NOT GO plug gauges - Part 3 With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter《产品几何量技术规.pdf

DIN 2247-4-2008 Geometrical product specifications (GPS) - NOT GO plug gauges - Part 4 With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter《产品几何量技术.pdf

DIN 2248-1-2000 Verification of geometrical parameters - GO gauging members - Part 1 For holes from 1 mm to 40 mmm nominal diameter《几何参数的验证 过端量规 第1部分 标称直径1mm至40mm的孔用过端量规》.pdf