MSZ 1986 3-1979 《三颗钉铣床刀具的插件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 51805-2-2016 Testing of lubricants - Determination of flow pressure of lubricating greases according to Kesternich method - Part 2 Automatic method《润滑剂试验 采用Kesternich法测定润滑脂的流动压.pdf

DIN 51807-1-1979 Testing of lubricants Test of the behaviour of lubricating greases in the presence of water Static test《润滑剂检验 在有水的情况下润滑脂性能的测定 静态检验》.pdf

DIN 51807-2-1990 Testing of lubricants test on the behaviour of greases in the presence of water dynamic test《润滑剂的检验 在有水的情况下润滑脂性能的检验 动态试验》.pdf

DIN 51810-1-2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 1 Determination of shear viscosity by rotational viscosimeter and the system o.pdf

DIN 51810-2-2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2 Determination of flow point using an oscillatory rheometer with a parallel-p.pdf

DIN 51810-3-2016 Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3 Determination of flow point with inclining rod method《润滑剂试验 润滑脂流变性能试验 第3部.pdf

DIN 51811-2017 Testing of lubricants - Testing of corrosiveness to copper of greases - Copper strip tarnish test《润滑剂试验 润滑脂对铜腐蚀作用的试验 铜带去光泽试验》.pdf

DIN 51813-2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm《润滑剂试验 润滑脂固体异物含量的测定 粒径超过25μm》.pdf

DIN 51817-2014 Testing of lubricants - Determination of oil separation from greases under static conditions《润滑剂试验 静态条件下从润滑脂中分离出油的测定》.pdf