MSZ 2024-1979 《晶圆合金》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 2535-2011 en Aerospace series - Vacuum deposition of cadmium《航空航天系列 镉的真空沉积》.pdf

EN 2536-1995 en Aerospace Series - Hard Anodizing of Aluminium Alloys《航空航天系列 铝合金的硬阳极氧化》.pdf

EN 2542-2008 en Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De Less Than or Equal to 40 mm - For prevailing torque nuts《航空航天系列 钢FE-PL1502(25CrMo4) 退火的棒.pdf

EN 2543-2009 en Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip 0 3 mm less than or equal to a less than or equal to 2 mm - For prevailing torque nuts《航空航.pdf

EN 2544-1987 en Representation of Rivets on Drawings for Aerospace Equipment《航空航天系列 航空航天设备图纸上铆钉的画法》.pdf

EN 2545-1-1995 en Aerospace Series - Titanium and Titanium Alloy Remelting Stock and Castings - Technical Specification - Part 1 General Requirements《航空航天系列 钛和钛合金重熔毛坯和铸件 技术规范 第1部分 .pdf

EN 2545-2-1995 en Aerospace Series - Titanium and Titanium Alloy Remelting Stock and Castings - Technical Specification - Part 2 Remelting Stock《航空航天系列 钛和钛合金重熔毛坯和铸件 技术规范 第2部分 重熔》.pdf

EN 2545-3-1995 en Aerospace Series - Titanium and Titanium Alloy Remelting Stock and Castings - Technical Specification - Part 3 Pre-Production and Production Castings《航空航天系列 钛和钛合金.pdf

EN 2546-2006 en Aerospace series - Washers lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions《航空航天系列 飞行操纵杆用钝化耐蚀钢制的径向锯齿锁紧垫圈 尺寸》.pdf