MSZ 2263-1987 《B级精密度的立方的有框螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS Z 8735-1981 Methods of Measurement for Vibration Level.pdf

JIS Z 8741 ：1997 表面光泽度——测量方法.pdf

JIS Z 8750-2009 真空計校正方法.pdf

JIS Z 8752：1989 Measuring methods of low pressures by hot cathode and cold cathode ionization gauges.pdf

JIS Z 8753：1989 Measuring methods of low pressures by thermal conductivity gauge.pdf

JIS Z 8754：1999 Vacuum technology -- Mass-spectrometer-type leak-detector calibration.pdf

JIS Z 8762-1：2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 1：General principles and requirements.pdf

JIS Z 8762-2：2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 2：Orifice plates.pdf

JIS Z 8762-3：2007 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 3：Nozzles and Venturi nozzles.pdf