MSZ 2281-1961 《短小的带条文的螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M5G38-C2-1992 DEADENER SHEETING HIGH TEMPERATURE FUSIBLE 2 5 MM NOMINAL THICKNESS (Shown on WSK-M5G38-C1)《标称厚度为2 5 MM的高温可熔隔音板 列于标准WSK-M5G38-C1上》.pdf

FORD WSK-M5G38-C3-1992 DEADENER SHEETING HIGH TEMPERATURE FUSIBLE 3 6 MM NOMINAL THICKNESS (Shown on WSK-M5G38-C1)《标称厚度为3 6MM的高温可熔隔音板 列于标准WSK-M5G38-C1上》.pdf

FORD WSK-M5G38-C4-1992 DEADENER SHEETING HIGH TEMPERATURE FUSIBLE 4 00 MM NOMINAL THICKNESS (Shown on WSK-M5G38-C1)《标称厚度为4 00MM的高温可熔隔音板 列于标准WSK-M5G38-C1上》.pdf

FORD WSK-M5G39-B-2011 COATING UNDERBODY REPAIR WATER DISPERSION HIGH TEMPERATURE STORAGE STABILITY TO BE USED WITH FORD WSS-M99P1111-A 《底面修复的水分散的有高温储存稳定性的涂层 与福特WSS-M99P1111-A 一.pdf

FORD WSK-M5G39-B3-2011 COATING UNDERBODY REPAIR WATER DISPERSION HIGH TEMPERATURE STORAGE STABILITY TO BE USED WITH FORD WSS-M99P1111-A 《底面修复的水分散的有高温储存稳定性的涂层 与福特WSS-M99P1111-A .pdf

FORD WSK-M5G55-A-1992 UNDERBODY COATING SOLVENT BASED AIR DRYING《晾干式溶剂型车身下部用涂料［替代 FORD SK-M5G9500-A］》.pdf

FORD WSK-M62J27-A-2012 PAINT WATERBORNE PLASTIC SUBSTRATES INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M62J29-A1-1993 PAINT WATERBASED ENGINES AND ENGINE ACCESSORIES《发动机和发电机辅助设备用水基油漆》.pdf

FORD WSK-M62J29-A2-1993 PAINT WATERBASED ENGINES AND ENGINE ACCESSORIES BRUSH APPLICATION (Shown on WSK-M62J29-A1)《发动机和发电机辅助设备用刷涂式水基油漆 列于标准WSK-M62J29-A1上》.pdf