MSZ 2282-1980 《立方形头部的牢固的加紧螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2217-2002(2007) Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas《航空航天清洁舱和污染控制区的设计和建造的标准实施规程》.pdf

ASTM E2217-2012 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas《航空航天清洁舱和污染控制区的设计和建造的标准实施规程》.pdf

ASTM E2218-2002 Standard Test Method for Determining Forming Limit Curves《测定形成限制曲线的标准试验方法》.pdf

ASTM E2218-2002(2008) Standard Test Method for Determining Forming Limit Curves《测定形成限制曲线的标准试验方法》.pdf

ASTM E2218-2014 Standard Test Method for Determining Forming Limit Curves《测定形成限制曲线的标准试验方法》.pdf

ASTM E2218-2014e1 Standard Test Method for Determining Forming Limit Curves《测定形成限制曲线的标准试验方法》.pdf

ASTM E2218-2015 Standard Test Method for Determining Forming Limit Curves《测定形成限制曲线的标准试验方法》.pdf

ASTM E2223-2002 Standard Practice for Examination of Seamless Gas-Filled Steel Pressure Vessels Using Angle Beam Ultrasonics《用斜束超声法检验无缝、充气钢制的压力容器的标准实施规程》.pdf

ASTM E2223-2007 Standard Practice for Examination of Seamless Gas-Filled Steel Pressure Vessels Using Angle Beam Ultrasonics《斜束超声法检验无缝、充气钢制压力容器的标准实施规程》.pdf