MSZ 2457-1972 《I和II级精度的立方形衔接短螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 1745-1994 (Inactive)Splice Shield Termination Solder Style Hot Air Shrinkable Insulated Moisture Resistant (Rev 7).pdf

AIA NAS 1746-1994 (Inactive)Splice Shield Termination Solder Style Infrared Shrinkable Insulated Moisture Resistant (Rev 6).pdf

AIA NAS 1747-1990 Splice Conductor and Shield Termination Solder Style Heat Shrinkable Insulated Specification for (Rev 4).pdf

AIA NAS 1748-1971 (Inactive)Interconnecting Devices Electrical Wire Terminating Superseded - October 1971 (Use MIL-T-81714) (Rev 2) R(1994).pdf

AIA NAS 1749-1971 (Inactive)Contact Electrical Pin Superseded - October 1971 (Use MIL-C-39029 1) (Rev 2) R(1994).pdf

AIA NAS 1750-1991 Fastener - Blind Internally Threaded External Sleeve General Purpose Flush Head Self-Locking 1 64 Oversize (Rev 3).pdf

AIA NAS 1751-1991 Fastener - Blind Internally Threaded External Sleeve General Purpose Protruding Head Self-Locking 1 64 Oversize (Rev 3).pdf

AIA NAS 1752-1991 Fastener - Blind Internally Threaded External Sleeve High Temperature Flush Head Self-Locking 1 64 Oversize (Rev 4).pdf

AIA NAS 1753-1991 Fastener - Blind Internally Threaded External Sleeve High Temperature Protruding Head Self-Locking 1 64 Oversize (Rev 4).pdf