MSZ 2458-1972 《I和II级精度的立方形头部的带条纹的闭合性精加工螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 10360-2-2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring linear dimen.pdf

BS EN ISO 10360-3-2001 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of the rotary table a.pdf

BS EN ISO 10360-4-2001 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used in scanning measuring mode《产品几.pdf

BS EN ISO 10360-5-2010 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus co.pdf

BS EN ISO 10360-7-2011 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing syste.pdf

BS EN ISO 10360-8-2013 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors《几何产品技术.pdf

BS EN ISO 10360-9-2013 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems《产品几何技术.pdf

BS EN ISO 10363-1995 Hot-melt adhesives - Determination of thermal stability《热熔粘胶剂 热稳定性测定》.pdf

BS EN ISO 10365-1995 Adhesives - Designation of main failure patterns《粘合剂 主要失效型式的名称与符号》.pdf