MSZ 2468-1981 《立方形头部的加紧螺母B级精度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D8173-2018 7500 Standard Guide for Site Preparation Layout Installation and Hydration of Geosynthetic Cementitious Composite Mats《土工合成水泥复合垫的现场准备、布置、安装和水合的标准指南》.pdf

ASTM D8174-2018 3750 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester《小型闭杯试验器测定液体废物有限闪点的标准试验方法》.pdf

ASTM D8175-2018 8750 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester《用Pensky-Martens闭杯试验仪测定液体废物有限闪点的标准试验方法》.pdf

ASTM D8176-2018 3750 Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)《活性炭(粉末和细网)机械攻丝密度的标准试验方法》.pdf

ASTM D8179-2018 6250 Standard Guide for Characterizing Detergents for the Cleaning of Clinically-used Medical Devices.pdf

ASTM D8181-2018 3750 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils.pdf

ASTM D8182-2018 8750 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS).pdf

ASTM D8183-2018 9890 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber&x2014 Reference Fuels Ca.pdf

ASTM D8184-2018 9375 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument.pdf