MSZ 2509 3-1987 《人行道 铺过的道路机械承重测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN ISO 7530-2-1994 Nickel alloys Flame atomic absorption spectrometric analysis Part 2 Determination of cobalt content《镍合金 火焰原子吸收分光光度法分析 第2部分：钴含量测定》.pdf

CSN ISO 7530-3-1994 Nickel alloys Flame atomic absorption spectrometric analysis Part 3 Determination of chromium content《镍合金 火焰原子吸收分光光度法分析 第3部分：铬含量测定》.pdf

CSN ISO 7530-4-1994 Nickel alloys Flame atomic absorption spectrometric analysis Part 4 Determination of copper content《镍合金 火焰原子吸收分光光度法分析 第4部分：铜含量测定》.pdf

CSN ISO 7530-5-1994 Nickel alloys Flame atomic absorption spectrometric analysis Part 5 Determination of iron content《镍合金 火焰原子吸收分光光度法分析 第5部分：铁含量测定》.pdf

CSN ISO 7539-2-1993 Corrosion of metals and alloys Stress corrosion testing Part 2 Preparation and use of bent-beam specimens《金属和合金腐蚀 应力腐蚀测试 第2部分：弯曲梁试样的制作及使用》.pdf

CSN ISO 7539-3-1993 Corrosion of metals and alloys Stress corrosion testing Part 3 Preparation and use of U bend-specimens《金属和合金腐蚀 应力腐蚀测试 第3部分：U型弯曲试杆的制作与使用》.pdf

CSN ISO 7539-4-1993 Corrosion of metals and alloys Stress corrosion testing Part 4 Preparation and use of uniaxially loaded tension specimens《金属和合金腐蚀 应力腐蚀测试 第4部分：单轴加载拉力试杆的制作与使用》.pdf

CSN ISO 7558-1993 Guide to the prepacking of fruits and vegetables《水果和蔬菜预先包装指南》.pdf

CSN ISO 7570-1994 Woodworking machines Surface palning and thicknessing machines Nomenclature and acceptance conditions《木工机床 表面刨平和厚度机械 术语与验收条件》.pdf