MSZ 3598-1957 《温床或者温室草地》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 5181-1962 Scale beam compasses《带刻度长臂圆规》.pdf

CSN 25 5300-1958 The control and drawing sets The drawings pens and needles The survey《检查和绘图工具 订户名单》.pdf

CSN 25 5302-1958 The control and drawing sets The drawing pens and needles The basic regulations《检查和绘图工具 基本条款》.pdf

CSN 25 5314-1958 The control and drawing sets The flat drawing pens《平面拉扯》.pdf

CSN 25 5340-1980 Drawing needles Types and basic dimensions《绘图针 型号及基本尺寸》.pdf

CSN 25 5344-1958 The control and drawing sets The drawing bended needles《绘图针》.pdf

CSN 25 5348-1958 The control and drawing sets The flat drawing needles《划线平板》.pdf

CSN 25 5349-1965 Checking and drawing tools Flat marking-awls with point of sintered carbide《碳化端扁平标记锥》.pdf

CSN 25 5500-1956 The control and drawing sets The primary plates prisms drawing pads and supports - the survey《检查和绘图工具板，棱镜，利用垫和支撑-概况》.pdf