MSZ 3612 10 lap-1962 《罐装食品金属含量允许值》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS S 206-1999 Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod cold drawn wire and springs《铬镍铝耐腐蚀钢(沉淀硬化)棒材、冷拉线材和弹簧》.pdf

BS S 532-1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening 980 1180 MPa)《铬-镍-铜-钼耐腐蚀钢薄板材和带材规范(沉淀硬化 980 1180MPa)》.pdf

BS S 533-1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening 1180 1370 MPa)《铬-镍-铜-钼耐腐蚀钢薄板材和带材规范(沉淀硬化 1180 1370MPa)》.pdf

BS S 534-1969 Specification for chromium-molybdenum steel sheet and strip 880 1080 MPa suitable for welding《880 1080 MPa适合于焊接的铬-钼钢薄板材和带材规范》.pdf

BS S 535-1969 Specification for chromium-molybdenum steel sheet and strip (1150 1300 Mpa) (suitable for welding)《铬-钼钢薄板材和带材规范(1150 1300MPa)(适用于焊接)》.pdf

BS SP 113-1954 Specification for cadmium plated close tolerance shear pins for aircraft《航空用镀镉紧公差安全销规范》.pdf

BS SP 115 to 117-1956 Specifications for hydraulic surface-check type lubricating nipples for aircraft《航空用液压表面止动型润滑脂嘴规范》.pdf

BS SP 121-1958 Collars for shear pins for aircraft《航空用安全销卡圈》.pdf

BS SP 122 TO 125-2016 Washers for unified hexagons for aircraft (primarily for packing purposes)《航空器用统一六角垫圈(主要是密封用)》.pdf